Loading... Please wait...


Our Newsletter

To Subscribe

Click or Scan QR Code

Use your SmartPhone

J&J Rattle Trap XTREME Sound Control Roll

  • 18" Tall X 33' Long / 50 sq. ft. coverage to a roll / Instructions for installing J&J Rattle Trap
Step 1: Wipe off the surface that you will be applying the J&J Rattle Trap to with a cleaner that will not leave a residue.  Be sure to get off all dirt and grease so that your J&J Rattle Trap bonds tightly.  This step will make a big difference in how permanent your application of J&J Rattle Trap is.  Be sure that surface is completely dry before applying J&J Rattle Trap. 
Step 2: If necessary cut your J&J Rattle Trap to the needed size and shape with a utility knife that is provided, then remove the backing from your J&J Rattle Trap and apply to the surface that you have just cleaned.
Step 3: Make sure that you use the roller that is provided with this roll. (2” wooden Roller Sold Separately) This will ensure a tight bond between the J&J Rattle Trap and the surface. (Your fingers cannot do the job properly!!!). By using the roller, you will be able to get the J&J Rattle Trap to stick securely to the different contours. You may find it necessary to cut the J&J Rattle Trap during application so that it lays flat on the surface. It is best to not leave any air between the surface and the J&J Rattle Trap.
  • J&J Rattle Trap in a 1970 FORD F-150 Rebuild
Front of the floor of the cab
  • J&J Rattle Trap in a 1970 FORD F-150 Rebuild
Back of the cab
  • J&J Rattle Trap in a 1968 Camero SS Rebuild
  • J&J Rattle Trap in a 1968 Camero SS Firewall
J&J Rattle Trap EXTREME

Product Description

Sold by the Roll - 18" WIDE x 33' LONG x 80mil THICK / Brake-Off Razor Knife & 1-1/2" Wooden Roller included!

Covers approximately 50 sq. ft. of flat surface

Sound Control for: Car Audio, Vehicle Restoration, Motor Homes, Marine, Home Theater, Industrial , etc.

* It is recommended to for you to cut J&J Rattle Trap into 5" to 6" Strips, when applying to overhead applications. Roll each strip in place with roller, making sure the adhesion is tight by removing all air pockets between the surface and the J&J Rattle Trap

Rubberized Compound-This sound deadener has a rubberized compound that is fused with a 1 mil Acrylic PSA "Pressure Sensitive Adhesive" Backing

This is the barrier used to absorb the nasty noises you don't want to hear (Rattles, Road Noise, etc.)

The Pressure Sensitive Adhesive backing is strong and very effective in keeping your mat where you want it

Aluminum Layer-This is a 3 mil aluminum constraining layer fused to the top of the rubberized compound

Using this layer allows the product to become thinner, lighter yet more effective than other deadeners on the market

Paper Release Liner-The paper release liner is a waxed paper for easy release. CAUTION! Avoid touching adhesive with fingers when removing Paper Liner, as hand oils reduce adhesion

Benefits & Features:

  • Tremendous Bass Gains
  • 80 mil nominal Thick
  • Can Be Applied In Xtreme Conditions
  • No Heating Required
  • Forms & Bonds To Virtually Anything
  • No Hassle Return Policy
  • Coated Super Stick Formula
  • Gain Unbelievable Sound Quality
  • Stop Rattles, Vibration & Noise Control
  • Reduce Distortion
  • Massive DB Gains
  • Practically eliminate Road Noise, Loud Exhaust and Engine Noise
  • Leaves No Odor
  • Easy Installation
  • Flash Point - 300 degrees Fahrenheit
  • Great For Firewalls, Floors, Doors, Trunks, Side Panels. Roofs and more! *SEE ABOVE
  • May Be Placed Under The Hood
  • Paintable
  • Patented Rubberized Compound
  • Polished Aluminum Shield
  • Very Flexible
  • Keeps Heat In-Cold Out in the Winter, Keeps Cold in-Heat Out in the Summer! A Great Installation!





Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...